National Enhance Technology Corp.

 Print this page

 

NV-600A

ADSL2+/VDSL2 Modem Router

Ordering Information
NV-600A ADSL2+/VDSL2 Modem Router

 

  • OVERVIEW
  • FEATURES
  • SPECIFICATIONS
  • APPLICATIONS
  • DOWNLOAD

 

Product OVERVIEW

NV-600A is a VDSL2 router of CPE side equipped with four Gigabit LAN ports. It is compliant to ITU-T G.993.2 and G.993.5 standards and supports VDSL2 30a profile that features 100Mbps of symmetric data and it is perfectly suitable for triple-play applications. NV-600A is a cost effective solution that delivers high-speed Internet access to end-users over existing copper wire infrastructure and is designed to meet the ISPs requirements with future proof Vectoring and ADSL2+ compatibility to cover end users in different loop range areas.

Vectoring Technology friendly Mode support

Vectoring is a transmission method that employs the coordination of line signals for reduction of crosstalk levels and improvement of performance. It is based on the concept of noise cancellation, much like noise-cancelling headphones. The ITU-T G.993.5 standard, "Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers" (2010), also known as G.vector, describes vectoring for VDSL2. The scope of Recommendation ITU-T G.993.5 is specifically limited to the self-FEXT (far-end crosstalk) cancellation in the downstream and upstream directions. The far end crosstalk (FEXT) generated by a group of near-end transceivers and interfering with the far-end transceivers of that same group is cancelled. This cancellation takes place between VDSL2 transceivers, not necessarily of the same profile.

Easy Installation

The NV-600A may be installed on any level surface (e.g. a table or shelf). NV-600A supports plug-and-play installation and is fully compatible with all kinds of network protocols. Furthermore, user can watch the status of each individual port via the LED indicators.

Enhanced Management

For efficient management, via Web interface, the NV-600A can be programmed for advanced management functions such as QoS (Quality of Service)/DSCP, IEEE 802.1q Tag VLAN, SNMP v1/v2c/v3, IGMP v3 and enhanced security functions such as Packet filtering, DMZ, Mac Address based filtering, Parental Control, Application based filtering.

 

FEATURES
  •  Supports ITU-T G.993.5 Vectoring
  •  Supports ATM and PTM transmission mode auto detection( ADSL Annex A/B backward compatible)
  •  Supports high bandwidth up to 100Mbps symmetric over line port
  •  Supports 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, and 30a band profile and 997, 998 band plan
  •  Supports ATM-TC,ATM and AAL5 (ATM Flow Throughput / OAM Cell Filter and Forwarding / AAL5 SAR:PVC / ATM Traffic Class / ATM PVC Shaping / ATM PVC Scheduling)
  •  Supports ATM Total Upstream Priority Queues
  •  Supports uPnP/PPPoE/PPPoATM/IPv4/IPv6/NAT/NAPT
  •  Supports static routing for IPv4 and IPv6 forwarding
  •  Supports SNMP v1 / v2c / v3
  •  Supports 802.1q VLAN tagging
  •  Supports Firewall functions contains Packet filtering, DMZ, Mac Address ased filtering, Parental Control, Application based filtering
  •  Supports DHCP Server/DHCP Relay/DHCP Client/DHCPv6 Client/DHCPv6 Server/DNS/DNS Proxy or Relay/DNSv6 Proxy or Relay/NTP Client/HTTP1.1 server
  •  Supports Multicast IP table/IGMP v3 Proxy and Snooping
  •  Supports Router & Switch(Bridged) mode
  •  Supports IEEE 802.1p VLAN Priority and mapping to DSCP
  •  Supports HTTP/HTTPS(SSL) web management
  •  Supports remote management and monitor
  •  Supports configuration backup and restore
  •  Provides surge protection for Line port
  •  Supports Router & Switch(Bridged) mode selection
  •  Supports jumbo frame up to 1680 bytes
  •  Supports 8 queue MFC/DSCP both type QoS
  •  Supports Dual Firmware Image Backup
  •  Supports Dying Gasp
  •  Supports multi VPN with IPSec tunnels
  •  Support ATM OAM F4 & F5
  •  

* Specifications are subject to change without prior notice.

 

Specifications
Standard Conformance
 Standard:  IEEE802.3 10Base-T standard
 IEEE802.3u 100Base-TX standard
 IEEE802.3ab 1000Base-TX standard
 IEEE802.3az Energy-Efficient Ethernet
 ITU-T G992.1/G992.3/G992.5/G993.1/G997.1/G993.2 standards
 Regulatory Compliance:  FCC
 CE
 RoHS compliance

 

 Hardware Specifications
 Physical Interface:  4 x RJ-45 10/100/1000Mbps auto-negotiation Ethernet port
 1 x RJ-11/Terminal Block connector for VDSL2 line port
 1 x Reset Button (Factory Reset)
 1 x console port(RS232C/115200bps)
 LED indication:  1 x Power LED
 4 x Link/Active Status for Ethernet port
 1 x Link LED for VDSL2 port
 Switch method:  Store and forward
 Flow control:  Full duplex: IEEE 802.3x
 Half duplex: Back pressure
 Typical Power Consumption:  6.7W
 Power Supply:  Input Voltage: 12 VDC
 Operating Temperature:  0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
 Storage Temperature:  -20°C ~ 70°C (-4°F ~ 158°F)
 Humidity:  10 to 90% (non-condensing)
 Net Weight:  0.4 kg
 Dimensions:  184 x 146 x 40 mm (7.2" x 5.74" x 1.57")

 

* Specifications are subject to change without prior notice.

 

APPLICATIONS

 

LAN Distance Extension

NV-600A is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the building can become a port on the LAN.

 

 

 

DOWNLOAD
Release Date File Version Download
 Dec, 2022  Datasheet  N/A
 Dec, 2022  User's manual  B1

Welcome to Netsys

As the world’s number one source for the fastest VDSL and G.fast Ethernet extenders, Netsys was created to bring you the finest quality broadband solutions. Offering the fastest speeds and longest distances, Netsys Ethernet extenders are the ultimate high-speed, long-range solutions for any application. Whether you’re looking for a new Ethernet extender, Ethernet over coax solution, VDSL solution, or a new G.fast solution, we have a wide selection of superior-quality products for your needs. If you’re not sure which Ethernet extender is best for your application, our expert staff is standing by to answer any questions you may have.

The best solutions to meet your needs

To bring full satisfaction to our customers, we will continue to strive to develop reliable, better performance, and environmental friendly products. Let us networking your world.

Long Reach LAN Extender solution

Netsys Long Reach solution consists of VDSL2 LAN EXTENDER which allows your IP network infrastructure to be deployed flexibly anywhere at long range. It is designed to extend Ethernet transmission over any existing twisted-pair cable or telephone wires for distances up to 3,000m (9,843ft) into any point to point applications.

Last Mile solution

Netsys Last Mile Transmission solution provides VDSL2 for various applications. Netsys CO equipment and CPE devices enable long distance IP Surveillance deployment and many Multi-Media services to realize on local high speed Internet.

Industrial-Grade solution

Netsys Industrial LAN Extenders solution offers high reliability and security to ensure continuous industrial operation in harsh environments such as factory floors, outdoors, ITS (Intelligent Transportation Systems) and at extreme temperatures. The Industrial Ethernet upgrades traditional, proprietary factory-floor networks to a low-cost, high-performance, and scalable architecture.